Flexible thin-bed adhesive
Description
FlexiGrip 688 Tile Adhesive is Flexible thin-bed adhesive and is used as a thin-bed adhesive for vitrified tiles, earthenware tiles, ceramic tiles with low water absorption ≤ 0.5% (fully vitrified), clinker, mosaic and natural stone that is not translucent or prone to discolouration. FlexiGrip 688 has been tested with the bonded waterproof membranes with technical approval.
FlexiGrip 688 Tile Adhesive is widely using for the installation of tiles to concrete ,aerated concrete , render / plaster , cement-based and calcium sulphate based screed, heated screeds, masonry work , gypsum boards, gypsum blocks etc. OMS 688 cement-based tile adhesive also suitable for installation over mineral-based waterproofing such as OMS 723 Series and dispersion-based bonded waterproof membranes such as OMS INXU 725 Series products in wet duty classification A0, A and B, e.g. wet rooms, communal showers, swimming pool surrounds and swimming pools. Modification with the elastic Part B considerably increases the deformability and tensile adhesion strength of FlexiGrip 688.
Features & Benefits
-
For interior and exterior.
-
Both wet and dry applications .
-
Easy to use
-
Suitable to large format tile with addition of OMS Polymeric Resin B
-
Meet DIN EN 12004, C2 TE requirements. Flexibility class C2E, S1 & S2 Depending on Resin ratio.
-
High initial grab
-
Good non-slip performance
Uses
|
FlexiGrip 688 Tile Adhesive is suitable for applying over the following: |
|
- Concrete |
- Aerated Concrete |
- Render / Plaster |
|
- Cement-based Screeds |
- Calcium Sulphate-based Screeds |
- Heated Screeds |
|
- Masonry Work |
- Moisture Resistant Plasterboard |
|
|
|
|
|
Technical Sheets
Please contact us to receive the latest data sheets
