Cement-based Fine Grain Grout
Description
OMS TG Seal 690 is high strength, flexible cement-based grout. It is suitable for grouting fully vitrified, vitrified, brick tiles, tile slips, floor clinker etc. The strength of the tiles to be grouted must be greater than that of TG Seal 690.
Due to its high mechanical performance and abrasion resistance, OMS TG Seal 690 is especially suitable for grouting tiles in swimming pools, washing plants, commercial kitchens, sales rooms, commercial areas, industrial areas and workshops. Furthermore TG Seal 690 can be used on heated and flow screeds in bathrooms, showers and living rooms, on terraces, balconies and loggia as well as facades.
OMS TG Seal 690 can be used in heavy-duty areas e.g. where cleaning equipment, high pressure steam cleaning or scouring vacuums are present. Furthermore the dense grout joints give increased resistance to cleaning chemicals. Neutral or alkaline cleaners can be used unrestricted. Compared to conventional cementbased grouts, TG Seal 690 has increased resistance to acidic cleaners.
OMS TG Seal 690 is furthermore suitable for grouting natural stone, should the specific product properties of the natural stone material permit it without discolouration /picture framing e.g. via the stone’s components.
Features & Benefits
-
Increased abrasion resistance.
-
Water repellent.
-
Resistant to freeze/thaw cycles.
-
Mould resistant.
-
Resistant to high pressure cleaning.
-
Suitable for floor and wall heating Fulfils the requirements of EN 13888, CG2.
-
For interior, exterior and under water.
-
Polymer modified.
-
For joints from 3 – 20 mm wide.
-
Good application and wash-off properties.
-
Vapour permeable.
Technical Sheets
Please contact us to receive the latest data sheets
