OMS INXU-IR System

INXU-Lastic Ceramic Modified Roof Coating

Description

Spray polyurethane foam (SPF) roofing consists of an application of specifically designed foam covered with an elastomeric coating (INXU-Lastic) to protect the foam from ultraviolet rays. Specialized equipment mixes two liquid components at the spray gun that applies the SPF to a prepared substrate. The mixed liquid expands many times its original volume in a matter of seconds, forming a rigid foam plastic that chemically bonds to the surface to which it is sprayed. Spraying the foam in 1.27cm to 3.8cm lifts allows the applicator to reach the desired thickness to fill in low areas, build up slope, and provide insulation.

Features & Benefits

SPF is environmentally friendly, contains no formaldehyde or ozone depleting chemicals, saves energy* and reduces the use of fossil fuels, thereby reducing global warming gases. It also assists in providing good indoor air quality, requires less energy to produce than the leading insulation, and reduces the amount of energy required to transport and install it. SPF is durable, maintains physical properties over time, contributes little to the waste stream, and in a single product (depending on the formula and project) can take the place of three-four other products, including insulation, air barriers, sealants, vapor retarders, and weather barriers.

*SPF reduces energy use in the following ways:
- Has high R-value per inch (open-cell 3.5 per inch and closed-cell 6.0 per inch)
- Eliminates air infiltration
- Helps control moisture and condensation
- Reduces convective currents in walls and attics
- Eliminates wind washing
- Effective at low and high temperatures
- Provides the correct environment so that the ventilation system performs more efficiently.
Other benefits include...
- Closed cell SPF adds structural strength and glues a building together, thereby making it more resistant to racking events, such as hurricanes and high winds.
- SPF reduces noise from outside by air sealing the building.
- Closed-cell SPF can provide an added barrier against water intrusion.

Uses

INXU-Lastic is a high solids, waterbased acrylic elastomer coating incorporating heat reflective, borosilicate ceramic spheres. This specialized ceramic additive increases the heat reflectivity of INXU-Lastic beyond that of typical white reflective coatings. The brilliant white pigments protect the substrate by reflecting in excess of 90% of the sun's solar heat from the roof surface. The fire retardant chemicals are permanently locked into the cured coating and will not leach out upon extended weathering. INXU-Lastic is a "breathing" membrane, allowing moisture vapor to pass through the film while remaining impervious to mass water penetration.

INXU-Lastic was specifically developed for protecting sprayed polyurethane foam insulation from degradation caused by normal weathering, aging and ultraviolet exposure. INXU-Lastic has the unique property of being an elastomeric coating that is able to uniformly cover the profile of textured substrates. It has excellent adhesion to polyurethane foam and may also be applied to concrete, masonry, primed metal, primed wood and asphalt. INXU-Lastic is used for protection of sprayed polyurethane foam on new roofs, existing roofs, and hot or ambient storage tanks.

香港賽馬會-沙田馬房隔熱及防水 HKJC Horse Stable Insulation & Waterproofing	香港中文大學鐵頂隔熱工程 CUHK Steel Building Insulation
美國亞利桑那州工廠隔熱 HewlettPackard, AZ USA	美國拉斯維加斯美高梅酒店天面隔熱 MGM, Las Vegas

Technical Sheets

Please contact us to receive the latest data sheets

Products

Colors and Textures