OMS INXU-Lastic CR

Roof Coating

Description

INXU-Lastic is a high solids, water based acrylic elastomer coating incorporating heat reflective, borosilicate ceramic spheres. This specialized ceramic additive increases the heat reflectivity of INXU-Lastic beyond that of typical white reflective coatings. The brilliant white pigments protect the substrate by reflecting in excess of 90% of the sun's solar heat from the roof surface. INXU-Lastic provides elastomeric waterproofing protection over a wide variety of roofing substrates. In utilizing the latest advances in acrylic technology, acrylic emulsion polymers are combined with reinforcing laminar pigments, powerful biocides and non-migrating fire retardants resulting in excellent physical properties, adhesion, durability, weatherproofing, mildew resistance and fire retardancy. The fire retardant chemicals are permanently locked into the cured coating and will not leach out upon extended weathering. INXU-Lastic is a "breathing" membrane, allowing moisture vapor to pass through the film while remaining impervious to mass water penetration.

OMS INXU-Lastic CR

Features & Benefits

Low Cost Application:
INXU-Lasticcan be installed more efficiently and at a fraction of the cost of other roofing systems. No bulky or expensive materials to haul, lift, spread, cut or glue. Simply apply INXU-Lastic by brush, roller or spray over the properly prepared roof substrate. Cleanup requires only soap and water. INXU-Lastic conforms to all federal and state air pollution standards and VOC regulations.
Fast Application:
Roofs can be prepared and coated with INXU-Lastic significantly faster than applying conventional built-up or single-ply systems.
High Solids and Resin Content:
The high volume solids of INXU-Lastic, along with its excellent hide and vertical hold characteristics, allows for faster film build in fewer coats. This enables INXU-Lastic to uniformly cover the uneven profile of textured substrates. The high ratio of elastomeric acrylic polymer to filler pigment provides long-term weathering and ultraviolet resistance.
Lightweight:
An INXU-Lastic roof is lighter than conventional and single-ply systems, putting less stress on the framework of the building. No glue, fasteners or heavy ballasting is required.
Permanent Flexibility:
INXU-Lastic contains no migratory plasticizers, which may give good initial elasticity but leach out of the coating upon extended exterior exposure. INXU-Lastic remains permanently flexible through the use of high grade elastomer acrylic polymers.
Colorfast:
The acrylic resins utilized in INXU-Lastic crosslink under exterior exposure to lock in color and lock out dirt. The topcoat color remains true through years of weathering, while the tight, crosslinked surface effectively repels dirt.
Low Maintenance Costs:
With an INXU-Lastic roof there is no asphalt to degrade, metal to corrode or seams to come apart. It is formulated to remain flexible to -30°F without cracking under stress, and is impervious to minor ponding water associated with most roofs. When maintenance is required, repairs are easily accomplished using acrylic caulk and/or additional INXU-Lastic.
Resists Abusive Weather:
INXU-Lastic will take abusive weather conditions of all types. Ice, snow, wind driven rain and sand do not penetrate its tough, dense surface under normal conditions.
Long Term Fire Protection:
INXU-Lastic utilizes non-migratory fire retardants that become an integral and inseparable part of the coating to provide permanent fire retardancy.
Reduced Energy Cost:
INXU-Lastic topcoat remains white to effectively reflect the sun’s heat, unlike dark-colored roofs that retain heat and are subject to ultraviolet degradation. Roof temperatures can be reduced in excess of 50°F. Exceeds ENERGY STAR® & Cool Roof Rating Council Guidelines.
Resistance To Foot Traffic:
INXU-Lastic's tough finish, combined with its flexibility and bond strength characteristics, allows it to easily withstand the stresses of normal roof maintenance traffic.
Code Approvals:
INXU-Lastic is UL classified as a Class "A" Fluid Applied Coating System, and as a Class A, B or C Maintenance & Repair System as outlined in the UL Roofing Materials & Systems Directory and UL website. It is Factory Mutual Approved for recover over FM RC rated BUR or insulated metal panels, and approved by Miami-Dade County.
Warranty Programs:
INXU-Lastic is backed by 5, 10 and 15 year, nonprorated warranty programs. These guarantee to the
Building Owner that the coating system will not leak as result of degradation from normal weathering. All warranty programs are extendable to last for the life of the structure.

Uses

INXU-Lastic was especially developed for extending the life of metal, conventional built-up, modified bitumen, single-ply, concrete, board-stock and sprayed-in-place polyurethane foam, and composite shingle roof substrates. INXU-Lastic forms a monolithic, waterproof elastomeric seal, uniformly covering the textured profile of these substrates, providing protection from weathering, aging and ultraviolet exposure.

OMS INXU-Lastic CR
CUHK - Medical Centre
中文大學醫學大樓

CUHK - Medical Centre
中文大學醫學大樓

Ocean Park - Hong Kong 香港海洋公園	Ocean Park - Hong Kong 香港海洋公園
Ocean Park - Hong Kong - ReRoofing 香港海洋公園	Ocean Park - Hong Kong - Water Testing 香港海洋公園

Ocean Park - Hong Kong - Grand Stand 香港海洋公園 - 大看台	Ocean Park - Hong Kong - Shark Aquarium 香港海洋公園 - 鯊魚館
Big Buddha - Ngong Ping 360 - Lantau 昂抨 360 - 大佛	Ocean Park - Hong Kong - Shark Aquarium 香港海洋公園 - 鯊魚館

Technical Sheets

Please contact us to receive the latest data sheets

Roof Coating

Products

Colors and Textures